Eastey® Aftermarket Shrink Wrap Parts Prices
M-Pak maintains an extensive inventory of aftermarket shrink wrapper parts for Eastey Shrink Wrap machines. If you do not find it listed here, please give us a call. Check out our L-Sealer rebuild kits. You can rebuild your L-Sealer for less than $100.
Price and availability subject to change without notice. Call to verify pricing.
| L-Sealer Parts | ||||
|
M-Pak # |
Mfr's # |
Description | Unit | Price |
| Seal Arm Assy Components | ||||
| EAS-052 | EAST0203 | .036'' (19 GA) X 50 FT SPOOL NICHROME WIRE (HALF HARD) | SPL | $29.50 |
| EAS-192 | EAST0288 | 50'' DOVETAIL LAMINATE STRIP | EA | $28.50 |
| EAS-185 | EAST0192 | STRAIGHT CERAMIC BEAD 1'' (REPLACES FOUR 1/4'' BEADS)(NO PTFE COATING) | EA | $1.70 |
| EAS-199 | EAST0289 | CERAMIC THERMOLINE CROSSOVER BEAD (USE W/DOVETAIL LAMINATE STRIP)(PTFE COATED) | EA | $6.40 |
| EAS-206 | EAST0010 | CERAMIC CROSSOVER BEAD (PTFE COATED) | EA | $6.40 |
| EAS-213 | EAST0011 | 1/4'' CERAMIC V-GROOVE BEAD (PTFE COATED) | EA | $0.20 |
| EAS-220 | EAST0204 | HEAT SINK (BRUSH) SLOTTED HOLE FOR #6 SCREW - ALSO AVAIL. IN REVERSE BEND | EA | $3.50 |
| EAS-221 | EAST0204A | ECONO HEAT SINK (For EM1622 model) | EA | $5.70 |
| EAS-248 | EAST1007 | SAFETY SPRING, SHIELD RETURN .360''OD X 1-1/2''L | EA | $1.90 |
| EAS-339 | EAST0015 | WIRE TERMINATION ASS'Y (COMPENSATOR) (SHORT SHAFT USED ON SIDE BAR FOR EM/EMT) | EA | $70.00 |
| EAS-367 | EAST0015A | WIRE TERMINATION ASS'Y (COMPENSATOR) (LONG SHAFT - USED ON THRU THE CASTING FRONT BARS) (5800-9004) | EA | $70.00 |
| EAS-255 | EAST0207 | LONG LOCK SHAFT | EA | $11.30 |
| EAS-262 | EAST0208 | SHORT LOCK SHAFT | EA | $11.30 |
| EAS-269 | EAST0020 | LONG LOCK PIN SPRING .300''OD X .026'' DIA. WIRE X 2''L | EA | $1.20 |
| EAS-276 | EAST0196 | SHORT LOCK PIN SPRING .300''OD X .026'' DIA WIRE X 7/16''L | EA | $0.80 |
| EAS-283 | EAST0021 | LONG LOCK PIN - 3/16'' DIA X APPROX 2-3/4''L STAINLESS WITH GROOVE FOR PAL NUT & SLOT FOR ROLL PIN | EA | $10.30 |
| EAS-290 | EAST0197 | SHORT LOCK PIN - 3/16'' DIA X APPROX 1-1/16''L STAINLESS WITH GROOVE FOR PAL NUT & SLOT FOR ROLL PIN | EA | $7.90 |
| EAS-304 | EAST1024 | RETAINER FOR 3/16'' LOCK PIN (PAL NUT) | EA | $0.40 |
| EAS-318 | EAST0183 | COMPENSATOR BRACKET INSULATOR (5 HOLE BRACKET) | EA | $2.50 |
| EAS-325 | EAST0281 | COMPENSATOR SCREW ASSEMBLY W/WING NUT | EA | $4.50 |
| EAS-353 | ECOS0088 | NYLON COMPENSATOR BUSHING (INSULATOR) | EA | $2.00 |
| EAS-360 | SUB00159 | COMPENSATOR GUIDE SCREW ASS'Y (SCREW, WASHER & SLEEVE) | EA | $2.20 |
| EAS-332 | EAST0215 | COMPENSATOR, TERMINAL BLOCK | EA | $39.00 |
| EAS-311 | EAST1002 | COMPENSATOR NYLON GUIDE SCREW SLEEVE #10 ID X 2'' L (FOR SCREW, WASHER & SLEEVE ASS'Y, SEE EAS360) | EA | $2.00 |
| EAS-346 | EAST0009 | TERMINATION POST ASSEMBLY - INCLUDES NYLON SLEEVES AND HARDWARE | EA | $13.60 |
| EAS-374 | EAST0012 | KNURLED NUT (ELEMENT HOLD DOWN) 8-32 | EA | $6.00 |
| EAS-388 | EAST0016 | ELEMENT COMPRESSION SPRING | EA | $2.30 |
| EAS-381 | EAST0205 | WIRE CLAMP | EA | $9.00 |
| EAS-563 | EAST1023 | #10 NYLON WASHER (.200''ID X 3/8''OD X 1/16''THICK) | EA | $2.00 |
| Hot Knife Parts | ||||
| EAS-116 | EAST0919 | DUO SEAL MUSHROOM INSERT, 16" FRONT BAR - SUPRA SILVERSTONE | EA | $187.50 |
| EAS-117 | EAST0918 | DUO SEAL MUSHROOM INSERT, 20" SIDE BAR - SUPRA SILVERSTONE | EA | $187.50 |
| EAS-109 | EAST0928 | HOT KNIFE ARROW INSERT, 16" FRONT BAR - SUPRA SILVERSTONE | EA | $285.00 |
| EAS-110 | EAST0927 | HOT KNIFE ARROW INSERT, 20" SIDE BAR - SUPRA SILVERSTONE | EA | $285.00 |
| EAS-111 | EAST0852 | HOT KNIFE POLY INSERT, 30" SIDE BAR - SUPRA SILVERSTONE | EA | $385.00 |
| EAS-113 | EAST0816 | CUTTING RULE 16" - FRONT, (SUPRA SILVERSTONE) | EA | $190.00 |
| EAS-114 | EAST0815 | CUTTING RULE 20" - SIDE, (SUPRA SILVERSTONE) | EA | $190.00 |
| EAS-112 | EAST0775 | HOT KNIFE SEAL BAR, 40" UPPER SIDE | EA | $229.00 |
| EAS-402 | EAST0493 | THERMOCOUPLE (SEALER) WATLOW (FRONT & SIDE) | EA | $63.00 |
| EAS-101 | EAST0555 | CARTRIDGE HEATER 220V 800W - 1/4'' DIA. X 27-3/4'' LONG - 2-1/2'' ARMOR - 120'' FIBERGLASS LEADS | EA | $285.00 |
| EAS-108 | EAST0496 | CARTRIDGE HEATER 220V 600W - 1/4'' DIA. X 19-1/2'' LONG - 2-1/2'' ARMOR - 120'' FIBERGLASS LEADS | EA | $214.00 |
| EAS-115 | EAST0497 | CARTRIDGE HEATER 220V 800W - 1/4'' DIA. X 16-9/16'' LONG - 2-1/2'' ARMOR - 132'' FIBERGLASS LEADS | EA | $214.00 |
| Seal Pad Assembly Components | ||||
| EAS-059 | EAST1005 | 10 MIL - 3/4'' X 36 YD PTFE COATED TAPE - ACRYLIC W/LINER | RL | $45.55 |
| EAS-066 | EAST0201 | 10 MIL - 3/4'' X 10 YD PTFE COATED TAPE - ACRYLIC W/LINER | RL | $10.20 |
| EAS-073 | EAST1006 | 10 MIL - 1/2'' X 36 YD PTFE COATED TAPE - ACRYLIC W/LINER | RL | $30.37 |
| EAS-080 | EAST0202 | 10 MIL - 1/2'' X 10 YD PTFE COATED TAPE - ACRYLIC W/LINER | RL | $6.80 |
| EAS-087 | EAST0200 | 3 MIL - 2'' X 36 YD PTFE COATED TAPE - ACRYLIC W/LINER | RL | $52.00 |
| EAS-094 | EAST0591 | 3 MIL - 3/4'' X 36 YD PTFE COATED TAPE - ACRYLIC W/LINER | RL | $27.09 |
| EAS-136 | EAST0509 | 5/16'' X 11/16'' X 30 FT FELT | EA | $84.00 |
| EAS-143 | EAST0509 | 5/16'' X 11/16'' X 6 FT FELT | EA | $28.00 |
| EAS-178 | EAST0209 | 1/4'' X 3/4'' SILICONE SPONGE PER FT | FT | $2.20 |
| Seal Jaw Closer Assembly | ||||
| EAS-122 | EAST0461 | HEAD RETURN CYLINDER, COMPLETE | EA | $140.00 |
| EAS-129 | EAST0438 | REPLACEMENT ROD END FOR HEAD RETURN ASS'Y | EA | $10.00 |
| EAS-297 | EAST0014 | HEAD RETURN SPRING (TORSION SPRING) | EA | $15.20 |
| Magnet Assembly Components | ||||
| EAS-150 | EAST0040 | UPPER MAGNET SUPPORT, NEW STYLE | EA | $51.40 |
| EAS-157 | EAST0041 | LOWER MAGNET SUPPORT - OLD STYLE | EA | $28.00 |
| EAS-164 | EAST0039 | UPPER MAGNET - OLD STYLE | EA | $42.00 |
| EAS-171 | EAST0258 | LOWER MAGNET - 55 VOLT | EA | $140.00 |
| Seal Jaw Temperature & Dwell Controls | ||||
| EAS-416 | EAST0030A | TIMER, DWELL/CONVEYOR 220 V (Old 1992-98) (TM0425) | EA | $98.00 |
| EAS-423 | EAST1030 | TIMER (100-240VAC - 24-240VDC) (TENOR/AUTONICS) | EA | $85.00 |
| EAS-430 | EAST0494 | TEMPERATURE CONTROLLER - 100-240VAC (TENOR/AUTONICS) (Hot Knife Sealers) | EA | $320.00 |
| Conveyor Assembly Components | ||||
| EAS-507 | EAST0058B | CONVEYOR BELT (CLIPPER LACED) (6402/EM28T) | EA | $115.00 |
| EAS-514 | EAST0057B | CONVEYOR BELT (CLIPPER LACED) (6401/EM16T) | EA | $90.00 |
| EAS-542 | ECOS0069 | 16'' WIDE WIRE MESH BELT PER INCH( FOR EM1622T SEALER) | EA | $1.80 |
| EAS-549 | ECOS0069 | 16'' WIDE WIRE MESH BELT FOR EM1622T WITH CRANK HANDLE BEHIND CONVEYOR(CUT TO SIZE) | EA | $110.00 |
| EAS-521 | EAST0055 | DRIVE BELT (TIMING BELT) (FOR 28", 40", 50", 70", 80" FRONT BAR SEALERS) | EA | $22.00 |
| EAS-528 | EAST0054 | DRIVE BELT (TIMING BELT) (FOR 16" FRONT BAR SEALERS) | EA | $22.00 |
| EAS-556 | EAST0053 | ROLLER W/ SPROCKET, 20" CONVEYOR DRIVE (FOR SIDE SEAL SEALERS) | EA | $130.00 |
| EAS-500 | EAST0063 | PARALLEL SHAFT CONVEYOR GEARMOTOR 1/15HP 139RPM 120VAC (GR4Z523) | EA | $468.00 |
| Sealer Electrical Components | ||||
| EAS-024 | EAST0050 | HOLE PUNCH TRANSFORMER (STEPDOWN 220/110) | EA | $50.00 |
| EAS-409 | EAST0042 | PULSE TRANSFORMER (20'' X 16'' OR 20'' X 28'' SEAL AREA) | EA | $285.00 |
| EAS-444 | EAST0036 | SAFETY TRANSFORMER (WHITE-ROGERS) (Stepdown) | EA | $62.00 |
| EAS-451 | EAST0037 | MAGNET TRANSFORMER (55 VOLT SECONDARY) | EA | $92.00 |
| EAS-458 | EAST0195 | CIRCUIT BREAKER 2P 30A 120/240VAC (GE) | EA | $58.00 |
| EAS-465 | EAST0031 | CONTACTOR 2P 208/240V 40A (GE)(MOUNTING HOLE PATTERN: 1-3/4'' SLOTTED X 3-1/4'') | EA | $85.00 |
| EAS-466 | ECOS0083 | CONTACTOR, IMPULSE, 1P (1622 Econo Models) (GR5B134) | EA | $29.90 |
| EAS-467 | EAST0421 | CONTACTOR, MAIN 2P 208/240V 25A (Models EM16TK,EM28TK) | EA | $65.90 |
| EAS-473 | EAST0029 | SWITCH, PUSH BUTTON - PULSE/MAGNETS/CONVEYOR/ HOLE PUNCH (SW0202/GR6X286) | EA | $17.00 |
| EAS-479 | EAST0337 | PULSE TRANSFORMER (20X40) | EA | $320.00 |
| EAS-486 | ECOS0050 | POTENTIOMETER (ECONO & MINI) | EA | $20.00 |
| EAS-488 | EAST0032 | RELAY 24 VOLT - CONTROL CIRCUIT (E M & T) | EA | $28.00 |
| EAS-487 | EAST0495 | SOLID STATE RELAY | EA | $59.80 |
| EAS-493 | EAST0038 | BRIDGE RECTIFIER/DIODE | EA | $13.70 |
| EAS-437 | EAST0210 | SLO-BLO FUSE (1 AMP) (LITTLEFUSE) 1/4'' DIA X 1-1/4''L | EA | $1.40 |
| Sealer Miscellaneous Components | ||||
| EAS-395 | EAST0013 | SCREW, STAINLESS (8-32X3/8SPH) | EA | $1.20 |
| Film Perforators / Hole Punches / Air Vent Devices | ||||
| EAS-010 | EAST0366 | DELRIN PERF WHEEL 5/8''ID x 2''OD x 1-1/2''W (.048''D X .125''T PIN) 3 ROWS OF 8 PINS - CENTER ROW STAGGERED | EA | $70.00 |
| EAS-017 | EAST0800 | AIR CYLINDER (PNUEMATIC PUNCH) (BIMBA) | EA | $31.40 |
| EAS-031 | EAST0085 | HOLE PUNCH WELDMENT (CASTING) | EA | $70.00 |
| EAS-038 | EAST0083 | THREADED DIE/ANVIL (FOR 3/16'' HOLE) FITS A155 WELDMENT | EA | $25.70 |
| EAS-045 | EAST0084 | BALL PLUNGER (INCLUDES COUPLING SLEEVE) | EA | $8.50 |
| EAS-046 | EAST0086 | HOLE PUNCH SOLENOID, ELECTRIC (VA1573) | EA | $270.00 |
| Shrink Tunnel Parts | ||||
|
M-Pak # |
Mfr's # |
Description | Unit | Price |
| Tunnel Conveyor Components | ||||
| EAS-582 | ET000136 | CONVEYOR BELT- SS WIRE MESH 16" Wx 1/2" x .092 | FT | $24.96 |
| EAS-585 | ET200137 | CONVEYOR BELT- SS WIRE MESH 20" Wx 1/2" x .092 | FT | $32.97 |
| EAS-583 | ECOS0044 | #35 EXTENDED PIN CHAIN CONNECTING LINK | EA | $3.90 |
| EAS-584 | ETC00110 | #40 EXTENDED PIN CHAIN CONNECTING LINK | EA | $2.10 |
| EAS-591 | ETC00003 | #40 EXTENDED PIN CHAIN PER FT | EA | $7.70 |
| EAS-598 | ETC00008 | BEARING FOR IDLER SPROCKET | EA | $26.70 |
| EAS-605 | ETC00100 | IDLER SPROCKET WITH BEARING (40A18 & 7610DLG) (All Tunnels) | EA | $58.50 |
| EAS-612 | ETC00009 | DRIVE SPROCKET 40B18X5/8 | EA | $21.00 |
| EAS-661 | ETC00308 | 5/8'' FLANGE BEARING WITH GREASE FITTING (PEER) 2-1/2'' MOUNTING CENTER TO CENTER | EA | $26.80 |
| EAS-668 | ECOS0090 | 1/2'' FLANGE BEARING (1-3/4'' MOUNTING CENTERS) | EA | $4.20 |
| EAS-682 | ECOT0201 | 32'' WEAR RAIL (UPPER) | EA | $35.00 |
| EAS-689 | ECOT0200 | 35-1/2'' WEAR RAIL (LOWER) | EA | $35.00 |
| EAS-696 | SUB00076 | WEAR RAIL WITH CHANNEL (UPPER) (ECONO) | EA | $64.00 |
| EAS-703 | SUB00077 | WEAR RAIL WITH CHANNEL (LOWER) (ECONO) | EA | $64.00 |
| EAS-710 | SUB00075 | 42'' WEAR RAIL WITH CHANNEL (UPPER) (ET1610-36) | EA | $70.00 |
| EAS-717 | SUB00075 | 42'' WEAR RAIL WITH CHANNEL (LOWER) (ET1610-36) | EA | $70.00 |
| EAS-724 | SUB00074 | 54'' WEAR RAIL WITH CHANNEL (UPPER) (ET1610-48) | EA | $85.00 |
| EAS-731 | SUB00074 | 54'' WEAR RAIL WITH CHANNEL (LOWER) (ET1610-48) | EA | $85.00 |
| EAS-738 | SUB00073 | 66'' WEAR RAIL WITH CHANNEL (UPPER) - LG TUNNELS | EA | $92.00 |
| EAS-745 | SUB00073 | 66'' WEAR RAIL WITH CHANNEL (LOWER) - LG TUNNELS | EA | $92.00 |
| EAS-752 | ET000200 | 42'' WEAR RAIL (UPPER) | EA | $70.00 |
| EAS-759 | ET000200 | 42'' WEAR RAIL (LOWER) | EA | $50.00 |
| EAS-766 | ET480200 | 54'' WEAR RAIL (UPPER) | EA | $57.00 |
| EAS-773 | ET480200 | 54'' WEAR RAIL (LOWER) | EA | $57.00 |
| EAS-780 | ET200200 | 66'' TEFLON WEAR RAIL (UPPER) | EA | $63.00 |
| EAS-787 | ET200200 | 66'' TEFLON WEAR RAIL (LOWER) | EA | $63.00 |
| EAS-794 | ET000148L&R | DEAD ROLLER RAIL SET (ET1610-36) 41'' OAL | EA | $285.60 |
| EAS-801 | ET480148L&R | DEAD ROLLER RAIL SET (ET1610-48) 53'' OAL | EA | $285.60 |
| EAS-808 | ETL00051L&R | DEAD ROLLER RAIL SET (ET20, ET24, ET36) | EA | $172.00 |
| EAS-815 | ET000067 | IDLER SHAFT (ET1610-36, 48 & ECONO) | EA | $23.00 |
| EAS-822 | ET000066 | DRIVE SHAFT 5/8''RD X 23''L, LIVE ROLLER (ET1610-36, 48 & ECONO) | EA | $15.00 |
| EAS-829 | ET000019 | 16'' COVERED FEMALE ROLLER (BLACK) | EA | $7.50 |
| EAS-830 | ET200019 | 20'' COVERED FEMALE ROLLER (BLACK) | EA | $7.50 |
| EAS-836 | ET000020 | 16'' UNCOVERED FEMALE ROLLER | EA | $5.20 |
| EAS-837 | ET200020 | 20'' UNCOVERED FEMALE ROLLER | EA | $6.20 |
| EAS-633 | ETC00306 | 5/16'' ID X 1/16'' WALL SILICONE TUBING PER FT (BLACK) ROLLER COVER FOR 3/8'' RD ROLLERS | FT | $1.90 |
| EAS-675 | ETC00307 | 5/16'' ID X 1/16'' WALL SILICONE TUBING PER FT (TRANSLUCENT) ROLLER COVER FOR 3/8'' DIA ROLLERS | FT | $1.90 |
| EAS-843 | ET360219 | 9/16'' ID X 1/16'' WALL SILICONE TUBING PER FT (BLACK) ROLLER COVER FOR 5/8'' DIA ROLLERS | FT | $1.90 |
| EAS-850 | ET360219 | 9/16'' ID X 1/16'' WALL SILICONE TUBING PER FT (TRANSLUCENT) ROLLER COVER FOR 5/8'' DIA ROLLERS | FT | $1.90 |
| EAS-885 | EAST0315 | DC MOTOR SPEED CONTROL - SUPPLIED WITH .1 OHM RESISTOR(1/4 TO 1/3 HP) FOR STANDARD TUNNELS AND .35 OHM RESISTOR(1/15 TO 1/10 HP) FOR ECONO TUNNELS (KB) | EA | $142.00 |
| EAS-906 | ECOT0001 GR1LPW4 | CONVEYOR MOTOR FOR LIVE ROLLER ECONO TUNNEL (ET1610) 1/30HP 50RPM | EA | $191.00 |
| EAS-907 | ETC00185 | CONVEYOR MOTOR , 1/8 HP | EA | $391.00 |
| EAS-912 | ECOT0300 | SPROCKET 9TH 5/16"B | EA | $16.60 |
| EAS-913 | ECOT0065 | CONVEYOR MOTOR FOR MESH BELT STYLE ECONO TUNNEL(ET1610/T14) 1/30HP 102RPM | EA | $191.00 |
| EAS-914 | ECOS0095 | MOTOR, CONVEYOR DRIVE - HIGH RPM (GR1LPV1) | EA | $241.00 |
| Tunnel Electrical Components | ||||
| EAS-857 | EAST0421 | CONTACTOR 2P 208/240V 25A (GE)(MOUNTING HOLE PATTERN: 1-3/4'' SLOTTED X 3-1/4'') | EA | $42.50 |
| EAS-864 | ETL00101 | CONTACTOR 3P 208/240V 60A - ET20, ET24, ET36 | EA | $160.00 |
| EAS-892 | ETC00305 | COOLING FAN SWITCH - DPST - 3/4 HP 250V 10A (CARLING) 6-32 SCREW TERMINALS | EA | $12.00 |
| EAS-955 | ETC00303 | HI-TEMP NICKEL LUG #8 GAUGE - #10 RING TERMINAL (AMP-TYCO) | EA | $2.10 |
| EAS-962 | ETC00303 | HI-TEMP NICKEL LUG #10-12 GAUGE - #10 RING TERMINAL (AMP-TYCO) | EA | $1.40 |
| Tunnel Heater Components | ||||
| EAS-941 | ETC00302 | HEATER BANK LEAD WIRE PER FOOT (8 GA)(TGGT) | EA | $5.70 |
| EAS-948 | ETC00302 | HEATER BANK LEAD WIRE PER FT (10 GA)(TGGT) | EA | $3.80 |
| EAS-969 | ETL00311 | OPEN NICHROME COIL HEATER BANK 16KW 230V 3PH (FITS 230V 7304,05,13,22,31,32) - 18(w/o STUDS) X 9'' X 4-1/2'' | EA | $125.00 |
| EAS-976 | ETL00310 | OPEN NICHROME COIL HEATER BANK 14KW 230V 3PH DELTA (FITS 230V 7301,02,03,11,12,21 & 7603) - 18''(w/o STUDS) X 9'' X 4-1/2'' [FOR 440/480V VERSION SEE P/N A518] | EA | $116.00 |
| EAS-982 | ET000308 | OPEN NICHROME COIL HEATER BANK 10KW 230V 1PH (ET1610-48) - 12''(w/o STUDS) X 6'' X 3-5/8'' | EA | $124.20 |
| EAS-983 | ET000309 | OPEN NICHROME COIL HEATER BANK 10KW 208V 1PH (ET1610-48) - 12''(w/o STUDS) X 6'' X 3-5/8'' | EA | $94.20 |
| EAS-990 | ET000307 | OPEN NICHROME COIL HEATER BANK 7.5KW 208V 1PH (ECONO & ET1610-36) - 12''(w/o STUDS) X 6'' X 3-5/8'' | EA | $94.20 |
| Tunnel Air Blower Components | ||||
| EAS-899 | ETC00304 | BLOWER MOTOR COOLING FAN 230V, 60/50HZ, 3020RPM (BW0631/GR2C915) | EA | $136.00 |
| EAS-920 | ECOT0301 | BLOWER MOTOR (7100) 1/2HP, 115/208-230V, 3450RPM, 1PH, 48 FRAME (ET1610-36/48, ECONO) | EA | $180.00 |
| EAS-927 | ETL00100 | BLOWER MOTOR (7200) 1HP, 115/208-230V, 3450 RPM, 1PH, 56H | EA | $282.00 |
| EAS-934 | ETL00202 | BLOWER WHEEL 8'' DIA 2'' W 5/8'' SHAFT - CCW FROM HUB SIDE (LGE STD TUNNEL & TUBE TUNNEL) | EA | $70.00 |
| EAS-935 | ECOT0002 | BLOWER WHEEL (ECONO TUNNELS) | EA | $49.90 |
| Tunnel Chamber Components | ||||
| EAS-640 | ETC00237 | 3/8'' HOLE PLUG | EA | $0.50 |
| EAS-577 | ETC00313 | WHITE CURTAIN MATERIAL, FULL WIDTH(40'') PER YD | YD | $39.50 |
| EAS-647 | ETC00314 | RED SILCONE COATED CURTAIN MATERIAL, FULL WIDTH(40'') PER FOOT - SILICONE COATED FIBERGLASS CLOTH | FT | $13.17 |
| EAS-654 | ETC00314 | RED CURTAIN MATERIAL, FULL WIDTH(40'') PER YARD | YD | $39.50 |
| Tunnel Temp Control Components | ||||
| EAS-871 | ETC00011 | TEMPERATURE CONTROL - MULTI SENSOR - MULTI RANGE F - RELAY OUTPUT - 100-240VAC (TENOR/AUTONICS) | EA | $300.00 |
| EAS-878 | ETC00021 | TYPE ''J'' THERMOCOUPLE PROBE - 3/16''DIA. X 6'' LONG - 72'' FIBERGLASS LEADS (TUNNEL) | EA | $25.70 |
The replacement parts shown on this web page are aftermarket parts and may not be those of the original equipment manufacturer nor are they approved by them. The part numbers of the original equipment manufacturer are for reference only.
M-Pak Systems, Inc, PO Box 13544, Greensboro, NC 27415
Ph: 336.378.6036 Fx: 336.378.6037Email: mpaksys@bellsouth.net
Ph: 336.378.6036 Fx: 336.378.6037Email: mpaksys@bellsouth.net
M-Pak has parts for the following models of Eastey Shrink Wrap Sealers and Shrink Tunnels:
The Mini Shrink System- TM1319TT
Econo Set - EM1622T, EM1636T, EM1622TK, EM1636TK, ET1608
Combo Unit Shrink Wrappers - EM16TT, EM28TT EM16TTK, EM28TTK
Hot Wire L-Sealer s - EM16T EM28T EM40T EM50T EM70T EM3040T EM3050T EM3070T EM4040T EM4050T EM4070T
Hot Knife L-Sealer s - EM1622TK EM1636TK EM16TK EM28TK EM40TK EM50TK EM70TK EM80TK EM100TK EM3040TK EM3050TK EM3070TK EM3080TK EM30100TK EM4040TK EM4050TK EM4070TK EM4080TK EM40100TK
Pneumatic L-Sealer- EP2028T, EP3040T EP2028TK, EP3040TK
Automatic L-Sealers - EA3040TK EA3050TK EA3070TK EA30100TK EA4050TK EA4070TK EA40100TK EA5050TK EA5070TK EA50100TK
Shrink Tunnels - EET2010 EH2210E ET20 ET24 ET36 ET48 EY56 ET70 ET1610-36 ET1610-48
Sleeve Wrappers – EB35 EB50 EB70
If you do not find the part listed here, please give us a call.
M-Pak offers quality pre-owned Eastey Shrink Wrapping Equipment. Click to see our used machinery list.
