
Pacemaker Replacement Parts for Drop Sealers
Prices subject to change without notice.
| Item | Description | Price |
| 1 | Upper Jaw | $44.25 |
| 2 | Foam Rubber | $10.95 |
| 3 | Silicone Rubber Strip | $21.95 |
| 4 | Upper jaw teflon cover | $7.95 |
| 5 | Transite Bar | $32.00 |
| 6 | Teflon curtain support rod | $21.95 |
| 7 | Lower jaw teflon curtain | $9.95 |
| 8 | Lower jaw cross bar (Aluminum) | $37.95 |
| 9 | Kicker plate cylinder | $45.95 |
| 10 | Kicker plate | $11.95 |
| 11 | Brass blow-off air fittings | $5.95 |
| 12 | Kicker plate cylinder bracket | $7.95 |
| 13 | Insulator block | $26.95 |
| 14 | Flat tension spring | $8.95 |
| 15 | Upper jaw silicone holder | $37.95 |
| 16 | "Z" bar bracket | $9.95 |
| 17 | "Z" bar | $22.95 |
| 18 | "U" channel scrap hold-down | $37.95 |
| 19 | 1/2" Pressure sensitive Teflon | $4.95 |
| 20 | Flat nichrome wire (1/16), pre-made w/ terminal | $10.95 |
| 20A | Flat nichrome wire (1/16), 25 foot coil | $51.95 |
| 21 | Round nichrome wire (.026,.032) w/ terminal | $10.95 |
| 21A | Round nichrome wire (.026,.032), 25' coil | $51.95 |
| 22 | ¼” Collar | $3.50 |
| 23 | Teflon rod holder bracket w/ 10/32 screw for nichrome wires 24 | $32.95 |
| 24 | 1" 10/32 Recessed screw | $1.95 |
| 25 | Teflon cover weight | $6.95 |
| 26 | Side of deck table (2) | $56.95 |
| 27 | Aluminum leg (2) vertical | $201.25 |
| 28 | Upper deck (Emergency shut-off, press down) | $109.25 |
| 29 | Upper arm bracket to base (2) | $38.95 |
| 30 | 5/8 x 5/8 Aluminum bracket Attach upper arm to cylinder (2) | $38.95 |
| 31 | Aluminum leg support | $10.95 |
| 32 | Aluminum fingers holder | $34.95 |
| 33 | Fingers, 2", 3", 4" in length | $4.50 |
| 34 | Product length adjustment knob | $9.95 |
| 35 | Gate cylinder 2", 3", 4" (Finger Length Dependent) | $48.95 |
| 36 | Main assembly bar ( left & right) | $55.95 |
| 37 | Jaw cylinder | $53.95 |
| 37-B | Cylinder mounting studs | $11.95 |
| 38 | Adjusting table knob | $14.95 |
| 39 | Electric box | $1,095.00 |
| 40 | Main product slide table | $569.95 |
| 41 | Incline angle adjusting knob | $4.50 |
| 42 | Incline angle slide | $24.95 |
| 43 | Micro switch w/ activator wire | $17.95 |
| 44 | Product section guides (2) | $109.25 |
| 45 | Infeed product guides | $86.25 |
| 46 | Scrap blow-off tube | $4.50 |
| 47 | Compression switch (not shown) | $55.95 |
| 48 | Nichrome wire fuse | $2.95 |
| 49 | Manual cycle switch | $9.95 |
| 50 | Upper jaw dwell control | $10.95 |
| 51 | Heat Control | $69.95 |
| 52 | On/Off Switch | $10.95 |
| 53 | Main fuse | $2.95 |
| 54 | Pilot light | $6.95 |
| 55 | Floor leveling studs (4) | $3.50 |
| 56 | Air regulator and filter (80 PSI) | $86.95 |
| 57 | 4-Way Valve | $281.75 |
