| M-PAK Item # | Mfr's Part # | Description | Price |
| TEX010 | 10-00108 | INFEED DRIVE BELT (TIMING BELT) (3022) AC/DC 187L075 | $27.00 |
| TEX-015 | 50-00506 | DISCHARGE/EXIT CONVEYOR BELT (3022) WHITE SINGLE PLY - ANTI STAT - ENDLESS FINGER SPLICED | $200.00 |
| TEX-020 | 50-00508A | INFEED CONVEYOR BELT (2219) WHITE SINGLE PLY - ANTI STAT - ENDLESS FINGER SPLICED | $250.00 |
| TEX-025 | 50-05621-A | DISCHARGE/EXIT CONVEYOR BELT (1809) WHITE SINGLE PLY - ANTI STAT - ENDLESS FINGER SPLICED | $350.00 |
| TEX-035 | 20-02313 | ROUND SEAL ELEMENT 450W 240V (WATLOW) | $140.00 |
| TEX-045 | 50-05044F | SEAL PAD, 1/2'' X 1'' X 6 FT FELT | $33.50 |
| TEX-046 | 50-05043 | 1/8'' X 3/4'' X 10 YD REINFORCED SILICONE SPONGE PAD W/ADHESIVE | $51.00 |
| TEX-055 | 80-RS008 | NARROW ROUND SEAL BLADE - CERAMIC FILLED PTFE COATING (7-1/8'' DIA X .062'' THICK WITH RADIUS ON ONE EDGE) | $150.00 |
| TEX-065 | 80-RS009 | ROUND CUTTING BLADE - CERAMIC FILLED PTFE COATING (7.146'' DIA X .032'' THICK WITH 1/32'' DOUBLE BEVEL SHARP EDGE) | $199.00 |
| TEX-075 | 80-RS039 | STANDARD FILM CLAMP FOR ROUND SEAL 7''DIA X 3/32''TK | $46.00 |
| TEX-076 | 80-RS001-B | ALUMINUM ROUND SIDE SEAL HEATER BLOCK - 6-11/16''OD X 4''ID X 3/8''THK old PN | $345.00 |
| TEX-077 | 70-00770 | CERAMIC INSULATOR (3/16''ID SHOULDER BUSHING) FOR SIDE SEAL | $18.00 |
| TEX-085 | 80-RS053 | WIDE ROUND SEAL BLADE - CERAMIC FILLED PTFE COATING (7-1/8'' DIA X .102'' THICK WITH RADIUS ON ONE EDGE) | $170.00 |
| TEX-086 | 91-H188016S | BLADE SET, COATED for 2218 / 2219 (CROSS & FRONT BARS - TTL 6 PCS.) T3024 | $700.00 |
| TEX-095 | #35 ROLLER CHAIN CONNECTING LINK | $3.40 | |
| TEX-105 | 10-00151 | DRIVE SPROCKET - 17 TOOTH | $19.90 |
| TEX-106 | 10-00172 | DRIVE SPROCKET WITH 10-32 SET SCREW FOR ROUND SEAL | $42.40 |
| TEX-115 | 10-00117 | DRIVE BELT (TIMING BELT) | $11.40 |
| TEX-125 | 10-00157 | 35C20 IDLER SPROCKET WITH 5/8'' ID BEARING (FOR MS SHAFT) | $45.00 |
| TEX-135 | 40-00405 | LEFT HAND MALE ROD END BEARING - 7/16''ID BEARING, 7/16-20 THREADS | $16.00 |
| TEX-145 | 40-00406 | RIGHT HAND MALE ROD END BEARING - 7/16''ID BEARING, 7/16-20 THREADS | $16.00 |
| TEX-146 | 40-00425 | OIL IMPREGNATED BRONZE THRUST BEARING (THRUST WASHER) 1/2''ID X 1''OD X 3/32''T | $3.80 |
| TEX-155 | 40-00443 | LINEAR SLIDE BEARING ASSEMBLY 15/16'' WIDE X 18-1/2'' LONG (THK) - THIS UNIT IS SOLD AS AN ASSEMBLY ONLY - REPLACEMENT BEARING IS AVAILABLE FOR NSK ASSEMBLY ONLY | $980.00 |
| TEX-165 | 40-00443-PAD | LINEAR BEARING PAD ONLY (WIDE STAINLESS MINI CARRIAGE) (NSK) THIS REPLACEMENT BEARING IS COMPATIBLE WITH THE NSK SYSTEM ONLY - IF BEARING AND RAIL NEED REPLACING SEE P/N TEX-155 | $159.90 |
| TEX-175 | 40-00464 | 7/8'' FLANGE BEARING WITH GREASE FITTING, 3'' MOUNTING CENTER TO CENTER (PEER) | $21.00 |
| TEX-185 | 40-00494 | 5/8'' BEARING INSERT, SET SCREWW LOCKING (PEER) | $17.60 |
| TEX-195 | 40-04017 | 520MM LINEAR SLIDE BEARING ASS'Y WITH 2 BEARING PADS (igus) | $95.00 |
| TEX-205 | 40-04017PAD | LINEAR SLIDE BEARING PAD (igus) | $14.50 |
| TEX-215 | 60-00663SPKT | 35A30 SPROCKET MACHINED TO BE MOUNTED ON T3096 CLUTCH (MACH III) | $90.00 |
| TEX-225 | 75-IC032GA-A | CROWNED RUBBER COVERED DRIVE ROLLER FOR 2219 - 2-3/16'' DIAMETER @ CENTER X 15-1/2'' LONG | $245.00 |
| TEX-235 | 80-IC050A | 5/8'' RD X 20-3/8'' L STAINLESS DRIVE SHAFT WITH 6-1/8'' KEYWAY ON ONE END (2219) | $68.80 |
| TEX-245 | 80-OC027B | SHAFT, 1/2''RD X 21''L - 1/8'' THRU HOLES FOR COTTER PINS IN EACH END | $35.70 |
| TEX-255 | 80-RS028 | NOSE SPROCKET ASSEMBLY FOR ROUND SEAL - INCLUDES SPROCKET AND BEARING | $59.50 |
| TEX-265 | 80-RS173 | #25 STAINLESS STEEL SCRAP PULLER CHAIN CUT TO LENGTH (2200SS-2800SS) WITH CONNECTING LINK | $42.00 |
| TEX-266 | #MASTER/CONNECTING LINK FOR 25 STAINLESS STEEL SCRAP PULLER CHAIN (ITEM TEX-265) | $4.20 | |
| TEX-275 | 80-ST109 | SCRAP TAKE UP CHAIN ASSEMBLY(INCLUDES CONNECTING LINK) #35 X 14-1/2'' LONG (FOR EXTRA CONNECTING LINKS USE P/N TEX-095) | $14.00 |
| TEX-285 | 90-3085RK | REBUILD KIT FOR 60-00663(T3096) CLUTCH/BRAKE - INCLUDES (2) FRICTION DISCS, (1) WAVE SPRING AND (2) U-CUPS (MACH III) | $130.00 |
| TEX-295 | 91-7M925 | FILM FEED/SCRAP PULLER BELT FOR 2218 - 3/8'' THICK X 5/8'' WIDE RED LINATEX - 36-1/4'' LONG WITH 6MM X 4MM CENTERED V-GUIDE | $91.00 |
| TEX-305 | 91-T10-15-45Z | 14mm X 450mm TIMING BELT | $35.70 |
| TEX-306 | 91-T10-15-70Z | DRIVE BELT (TIMING BELT) | $45.00 |
| TEX-315 | BG0441 | 5/8'' FLANGE BEARING WITH GREASE FITTING (PEER) 2-1/2'' MOUNTING CENTER TO CENTER | $26.80 |
| TEX-325 | 0027-0762-0000 | FRONT COVER FOR WATLOW 935A TEMPERATURE CONTROL | $12.80 |
| TEX-335 | 20-00203 | ROLLER LEVER SWITCH 15A 125 OR 250VAC (CUTLER HAMMER) | $19.00 |
| TEX-345 | 20-00285-1 | DISCONNECT SWITCH 40A 3P (ABB) | $57.00 |
| TEX-355 | 20-00286-1 | DISCONNECT PISTOL HANDLE (ABB) | $69.50 |
| TEX-365 | 20-00287-1 | EXTENSION SHAFT FOR DISCONNECT 5MM X 170MM (.197'' X 6.69'') (ABB) | $11.80 |
| TEX-375 | 20-02083 | 90 DEGREE SWITCH COVER (TEND TYPE AP-Z) (CUTLER HAMMER) | $4.80 |
| TEX-385 | 20-02108DC | PRISM PHOTO EYE EMITTER 20 FT SYNC SOURCE 10-30VDC WITH 6 FT CABLE (EATON/CUTLER-HAMMER) | $80.00 |
| TEX-395 | 20-02109 | PRISM PHOTO EYE RECEIVER (EATON/CUTLER-HAMMER) | $99.50 |
| TEX-405 | 20-02178 | ROTARY COMMUTATOR (ROTATING ELECTRICAL CONNECTOR) 4 CONDUCTOR - 2 @ 240V 4A, 2 @ 240V 30A(MERCOTAC) | $362.00 |
| TEX-415 | 20-02179 | BOOT KIT FOR ROTARY COMMUTATOR (ROTATING ELECTRICAL CONNECTOR) (MERCOTAC) | $25.00 |
| TEX-425 | 20-02183 | TEMPERATURE CONTROL (WATLOW SERIES 935A) SEE ALSO PART# T3076 - FOR REPLACEMENT COVER ONLY, SEE PART# TEX-325 | $350.00 |
| TEX-435 | 20-02183-B | TEMPERATURE CONTROL (WATLOW SERIES SD31) SEE ALSO P/N TEX-425 | $293.00 |
| TEX-445 | 20-02184 | HOCKEY PUCK STYLE SOLID STATE RELAY (INPUT DC 4-32V/LOAD AC 24-240V @ 10 AMPS) (ALLEN BRADLEY) | $58.00 |
| TEX-455 | 20-02240 | REGENERATIVE DC MOTOR CONTROL - INPUT: 115/230 VAC - OUTPUT: 0-90/180 VAC (KB ELECTRONICS) | $400.00 |
| TEX-456 | 20-00258 | Blower Motor for Model T-1322 | $455.13 |
| TEX-465 | 100-002-261 | ORIENTAL GEARHEAD MOTOR 5GN18K | $140.00 |
| TEX-475 | 20-00204 | ORIENTAL GEARMOTOR (SPIRAL SHAFT) 5IK90GU-AFUL/5IK90GU-AW(U) (INFEED/OUTFEED MOTOR) | $470.00 |
| TEX-485 | 20-02081 | 1/8 HP, 125 RPM, 90 VDC PARALLEL SHAFT GEARMOTOR (BALDOR) | $460.00 |
| TEX-495 | 20-02187 | MOTOR BRUSHES (PAIR) FOR BALDOR MOTOR - COMPATIBLE WITH ORIGINAL 20-00257-1 MOTOR OR T3027 REPLACEMENT KIT | $22.50 |
| TEX-505 | 20-02187B | BISON MOTOR BRUSH WITH SPRING PER EACH (2 REQ'D PER MOTOR)(FITS T3032 MOTOR) | $13.50 |
| TEX-515 | 20-02219 | CLUTCH - 24VDC WITH 5/8'' BORE (ELECTROID) | $560.00 |
| TEX-525 | 5RK40GN-AW | ORIENTAL GEARMOTOR MOTOR WITH CAPACITOR 5RK40GN-AW(U) (AUL - OLD P/N) 115V NO BRAKE | $200.00 |
| TEX-535 | 20-00254 | TYPE ''J'' THERMOCOUPLE FOR T-822 OR T-1322 TUNNEL - 3/16'' DIAMETER X 3'' INSERTION - 96'' FIBERGLASS LEADS WITH FORK TERMINALS - 1'' MOUNTING FLANGE | $70.00 |
| TEX-540 | 20-02312 | CARTRIDGE HEATER 240V - 1/4'' DIA. X 25'' OAL - 8 LEADS (CROSS HEATER 2200 - SIDE HEATER ON 240V 2219) | $157.00 |
| TEX-541 | 20-02357 | CARTRIDGE HEATER - 240V - 1/4'' DIA X 18-5/8''L - 10'' FIBERGLASS LEADS | $135.00 |
| TEX-545 | 20-02120 | CARTRIDGE HEATER 120V - 1/4'' DIA. X 24'' LONG - 6'' LEADS AT 90 DEGREES (2200SS) | $140.00 |
| TEX-546 | 20-00214 | CARTRIDGE HEATER 110V - 10MM DIA. X 18'' LONG - 12'' LEADS (2218 CROSS) | $108.00 |
| TEX-547 | 20-00215 | CARTRIDGE HEATER 110V - 10MM DIA. X 22-1/2'' LONG - 12'' LEADS (2218 SIDE) | $113.70 |
| TEX-548 | 20-02215 | CARTRIDGE HEATER 110V - 1/4'' DIA. X 23-1/8'' LONG - 12'' LEADS (2219 SIDE - 22'') | $110.70 |
| TEX-566 | 20-00217 | CARTRIDGE HEATER 110V 750W - 10mm DIA. X 30" LG - 12'' FIBERGLAS LEADS | $198.00 |
| TEX-549 | 20-02216 | CARTRIDGE HEATER 110V - 1/4'' DIA. X 18-3/4'' LONG - 12'' LEADS (2219 CROSS -19'') | $105.00 |
| TEX-555 | 20-02312 | CARTRIDGE HEATER 800W 240V - 1/4'' DIA. X 25'' OAL - 8 TO 10'' LEADS @ 90 DEGREES (CROSS HEATER 2200 - SIDE HEATER ON 240V 2219) | $157.00 |
| TEX-565 | 20-02357 | CARTRIDGE HEATER - 450W 240V - 1/4'' DIA X 18-5/8''L - 10'' FIBERGLASS LEADS | $135.00 |
| TEX-567 | 20-02131 | ROUND SIDE SEAL ELEMENT 450W 120V | $125.00 |
| TEX-575 | 75-RS001-B | ALUMINUM ROUND SIDE SEAL HEATER BLOCK - 6-11/16''OD X 4''ID X 3/8''THICK | $345.00 |
| TEX-585 | 80-SH039C | 5/16-18 X 3-15/16'' STAINLESS STEEL THREADED HEATER STUD | $14.00 |
| TEX-595 | 60-00614 | 110V SOLENOID VALVE (SMC) | $142.50 |
| TEX-605 | 60-00644 | AIR CYLINDER (SMC) | $81.00 |
| TEX-615 | 60-00644S | AIR CYLINDER SWITCH WITH BRACKET (SMC) | $104.00 |
| TEX-625 | 60-00662 | AIR CYLINDER (NFPA TIE ROD CYLINDER) INCLUDES CLEVIS PIN - MAX PRESSURE = 250 PSI (SMC) | $399.50 |
| TEX-635 | 60-00663 | 3'' COMBINATION AIR CLUTCH/BRAKE ASSEMBLY WITH 3/4'' BORE AND 35A30 SPROCKET (MACH III) | $1,044.00 |
| TEX-645 | 75-FS059G-HD | DELRIN PERF WHEEL 1''ID x 2''OD x 1-1/2''W (.065''D X .187T PIN) 3 ROWS OF 8 PINS - CENTER ROW STAGGERED | $80.00 |
| TEX-655 | 30-00304 | RATCHETING INFEED SLIDE HANDLE - APPROXIMATELY 3-3/4'' OAL - 3/8-16 X .78'' THREADS | $25.00 |
| TEX-665 | 50-00503 | FILM STAND RING - NATURAL GUM RUBBER RING FOR 1-1/2'' SHAFT - 2''OD X 7/8'' WIDE - GROUND OD | $11.40 |
| TEX-675 | 50-00530 | 8-32 X 3/8'' MALE/FEMALE STANDOFF - 1/4'' HEX X 3/4'' BODY LENGTH - ZINC PLATED STEEL | $3.50 |
| TEX-676 | 50-00528 | SIDE SEAL BACK UP RING - NOMINAL 2'' ID X 3'' OD X 3/4'' WIDE ORANGE SILICONE | $7.70 |
| TEX-685 | 70-00701 | FILM STAND DISENGAGING EXTENSION SPRING - .750''OD X .070'' WIRE DIA X 2.625''OAL | $8.40 |
| TEX-695 | 70-07709 | HEAVY FILM CLAMP SPRING .600''OD X .059'' DIA WIRE X 2''L | $5.20 |
| TEX-705 | 80-CA3003A | 6'' ALUMINUM 2 SPOKE FOLDING/COLLAPSABLE CRANK HANDLE F0R 5/8'' SHAFT | $142.80 |
| TEX-715 | 80-SH014G | ALUMINUM FILM CLAMP SPACER 3/8''OD X .170''ID X 1''L | $6.00 |
| TEX-725 | 80-SH014K | FILM CLAMP SPRING & SPACER KIT (2218 & 3022) | $14.20 |
| TEX-800 | 91-B189020 | ALUMINUM PERFORATOR WHEEL 1-1/2''ID X 2''OD X 1''W - 16 PINS (2 ROWS OF 8 PARALLEL - 3/4'' ROW SPACING) .036'' DIA PIN X 1/16'' TAPER (APPROX 1/16'' PROTRUSION) - (2) 8-32 NYLON TIPPED SET SCREWS @ 90 DEGREES | $80.00 |
Texwrap® Aftermarket Shrink Wrap Parts Prices
for Sealers and Shrink Tunnels
M-Pak maintains an extensive inventory of aftermarket shrink wrapper parts for Texwrap Shrink Wrap machines - L-Sealers, Automatics, & Shrink Tunnels. If you do not find it listed here, please give us a call.
Price and availability subject to change without notice. Call to verify pricing.
Many of the replacement parts shown here are aftermarket parts and not those of the original equipment manufacturer nor are they approved by them. The part numbers of the original equipment manufacturer are for reference only.
|
M-Pak has Parts for these Texwrap Sealer Models |
|||||||
| 1917 | 2219 | 3322 | T2219 | T3322 | 3022 | T2219MP | |
| 2218 | 2010 | 1810 | 2602 | ||||
| 2203 | 1809SS | 205CR | 2814 | 1606 | 1809LS | ||
|
M-Pak has Parts for these Texwrap Tunnel Models |
|||||||
| T-822 | T22CM | T822CL | T-1322 | T-822M | T-1432 | ||
M-Pak offers quality pre-owned Conflex Shrink Wrapping Equipment. Click to see our used machinery list.
