Used_Blister_Sealer_Rotary_4

Used Blister Sealer

Hoover Model RBS-1822

4 Station Rotary Table Blister Seal Machine

Good Condition - Understood to have been operating when taken from service.

Price: $3500.00 As-Is / Where Is

SEALING AREA: 18 in. x 22 in.

TEMPERATURE RANGE: 150 to 550 Deg F.

VOLTAGE: 220 Volt AC / Single Phase

AIR PRESSURE: 80 P.S.I. @ .5 C.F.M.

MACHINE WEIGHT: 500 lbs.

FEATURES:

Adjustable temperature control with thermocouple.

Adjustable seal timer

Adjustable dwell timer

In-line air regulator with oiler.

Fast and easy tooling change-over.

Uses low cost wood fixture seal tooling

Uses Non- Proprietary Parts - Readily Available from Local Sources

Cam operated turntable drive for positive location of seal tray

This type of machine can typically run 250 cycles per hour. With dies of 4 to 6 cavities, it is capable of producing an average of 8,000 to 12,000 cards per 8 hour shift depending on product.

Additional Information:

A four station rotary-type heat sealer designed for medium volume production requirements.

This type of unit is typically used for conventional carded blisters but is also used in medical and/or pharmaceutical applications utilizing Tyvek, foil, thin plastic, laminated film stock, etc

The standard machine features one seal station, and three load/unloading stations.

An accurate moderate speed cam drive indexer is used for precision repeatability and is time controlled to pace the operator(s). Operator(s) load the blister(s), product and card(s) into the seal fixtures, as they index past their loading stations.

The machine can also run single cycle(s) by having operator(s) depress cycle start switch when ready to start each new cycle.

Sealing is automatic and controlled by timer.

Previous owner indicted the machine had been powered up and is found to be in good working condition and the turntable indexes and the heating element and temperature controls work.